Portable Ultrasonic Thermal Energy Meter: Portflow 333 HM | MICRONICS

This new portable ultrasonic thermal energy meter FF 333 hm U1000 MKII HM is a simple and economical solution for measuring hot or chilled water directly from outside the pipes.It is a more economical and smarter solution than inline systems! The U1000 MKII HM is based on non-intrusive ultrasonic measurement to measure flow within the pipes and PT100 thermal probes to measure flow and return temperatures.It displays flow rate, total flow, energy rate, totalized energy, temperature, signal, and battery level.Delivered as standard ready to use in a case, with sensor, guide rail, 4-20 mA output and pulse output, USB and RS-232C cable, test block chains, and ultrasonic coupling.

3 models are offered (each with 6 versions) for non-intrusive transit time measurements on pipes containing particle-free fluids:

• PF333 HM A with sensor A for pipes with an external diameter of 13 - 115 mm:
  • standard version
  • version with magnetic guide rails
  • HT high temperature version
  • HT high temperature version with magnetic guide rails
  • P68 approved version
  • IP68 approved version with magnetic guide rails
• PF333 HM B with sensor B for pipes with an external diameter of 50 - 2000 mm
  • standard version
  • version with magnetic guide rails
  • HT high temperature version
  • HT high temperature version with magnetic guide rails
  • P68 approved version
  • IP68 approved version with magnetic guide rails
• PF333 HM AB with sensor B for pipes with an external diameter of 13 - 2000 mm
  • standard version
  • version with magnetic guide rails
  • HT high temperature version
  • HT high temperature version with magnetic guide rails
  • P68 approved version
  • IP68 approved version with magnetic guide rails

Advantages:

• Very easy to install
• Non-intrusive installation
• 0 contact with the measured fluid
• Simple step-by-step programming menu
• Clamp-on sensors
• Very precise DSP measurement technique

Common technical characteristics:

• Flow range 0.1 m/sec to 20 m/sec bidirectional
• Transducer temperature range: -20°C to +200°C
• Equipped with 4-20 mA and RS232-USB output
• Recording capacity of 98,000 measurement points and up to 20 data blocks
• Battery life: 20 hours at full charge
• User-selectable languages including French, English, German, Spanish

Typical applications: Water, construction, energy management, power generation, petrochemicals, oil and gas, food and beverages, pharmaceutical industries, power plants, etc...