New products

New

Remote tank level measurement probes – TORAN’O-compatible and ATEX Zone 1: LEV’O+

PRICE ON REQUEST

WATTECO LEV’O+ probes connect to TORAN’O for remote LoRaWAN® monitoring of liquid and LPG tank levels. Pressure and Hall Effect versions support ATEX Zone 1 applications, threshold alerts and distribution logistics.

Details

View details  

New

ATEX Zone 1 LoRaWAN® pulse and analogue input sensor: TORAN’O

PRICE ON REQUEST

WATTECO TORAN’O ATEX Zone 1 connects pulse meters, pressure switches and analogue sensors to LoRaWAN®. It provides three pulse/status inputs, three analogue inputs, IP55 or IP68 protection and up to 10 years of autonomy.

Details

View details  

New

LoRaWAN predictive maintenance sensor – vibration and temperature monitoring: BoB ASSISTANT Series

PRICE ON REQUEST

BoB ASSISTANT LoRaWAN® sensors monitor industrial equipment vibration and temperature, detect vibration drift and provide predictive maintenance alerts. Available in standard and ATEX Zone 1 versions.

Details

View details  

New

Cellular rain station - solar-powered LTE-M/NB-IoT rainfall monitoring: WatchDog 4105

PRICE ON REQUEST

Solar-powered cellular rain station for accurate rainfall monitoring, LTE-M/NB-IoT transmission, SpecConnect cloud access and rain alerts.

Details

View details  

New

IoT controller - LoRaWAN and cellular I/O connectivity: UC300 Series

PRICE ON REQUEST

UC300 Series IoT controller with LoRaWAN® or cellular communication, multiple I/O interfaces, Modbus support, PT100 RTD inputs and Milesight IoT Cloud compatibility.

Details

View details  

New

Indoor ultrafine particle monitor - real-time UFP data and cloud connectivity: Pegasor PPS-1000

PRICE ON REQUEST

Pegasor PPS-1000 is a compact indoor ultrafine particle monitor for real-time UFP, PN, LDSA, PM and particle size measurement with cloud-connected data access.

Details

View details  

New

Modbus to LoRaWAN® controller - RS485 remote data acquisition: UC100

PRICE ON REQUEST

Compact LoRaWAN® IoT controller for RS485 Modbus RTU devices, supporting remote data acquisition, control, local storage and retransmission.

Details

View details  

New

Multi-interface LoRaWAN® controller - IP68 outdoor data acquisition: UC50x Series

PRICE ON REQUEST

IP68 multi-interface LoRaWAN® controller for wired sensor data acquisition, supporting GPIO, analog input, RS232/RS485 and SDI-12 interfaces.

Details

View details  

New

Resonance Wood Grading App - Dynamic MOE: Resonance Lumber Grader

PRICE ON REQUEST

Android resonance wood grading app for estimating stress wave velocity and dynamic modulus of elasticity, with informative classification according to Eurocode 338.

Details

View details  

New

Electric and magnetic field probe - isotropic True RMS measurement from 1 Hz to 400 kHz: WP400

PRICE ON REQUEST

Isotropic E and H field probe from 1 Hz to 400 kHz with True RMS measurement, FFT spectrum analysis, 100 cm² sensor and ISO 17025 accredited calibration.

Details

View details  

New

Electromagnetic field monitoring system - 24/7 broadband monitoring and 5G-ready: MonitEM

PRICE ON REQUEST

24/7 electromagnetic field monitoring system with broadband probes, IP66 protection, wireless communication, Control Center software and 5G-ready EMF surveillance.

Details

View details  

New

RF electromagnetic field mapping system: MapEM

PRICE ON REQUEST

Vehicle-mounted RF electromagnetic field mapping system for city-scale exposure assessment, sensitive point detection and georeferenced field level reporting.

Details

View details  

New

Indoor EMF monitoring system - 24/7 broadband measurements up to 90 GHz: MonitEM-Lab

PRICE ON REQUEST

MonitEM-Lab is an indoor EMF monitoring system for 24/7 broadband measurements from 100 kHz to 90 GHz, with isotropic RMS probes, Ethernet communication, alarms and optional web control center.

Details

View details  

New

Isotropic magnetic field probe - DC to 40 kHz, True RMS measurement: WPH-DC

PRICE ON REQUEST

WPH-DC probe for isotropic True RMS magnetic field measurement from DC to 40 kHz, with static, AC and FFT analysis up to 10 T for medical, industrial, railway, EV and worker safety applications.

Details

View details  

New

Personal RF exposimeter up to 8 GHz: WaveMon RF-8

PRICE ON REQUEST

Personal RF exposimeter up to 8 GHz for E-field and H-field exposure monitoring, with RMS isotropic sensors, alarms, datalogging, GPS/altimeter option and compliance-focused shaped response.

Details

View details  

New

Electric and magnetic field probe - 10 Hz to 3 kHz, weighted response: WP50

PRICE ON REQUEST

Isotropic electric and magnetic field probe for 10 Hz to 3 kHz EMF measurements, with True RMS response, weighted and flat modes, 100 cm² sensor area and ISO 17025 accredited calibration.

Details

View details  

New

Electric and magnetic field probe - 1 Hz to 400 kHz, spectrum analysis: WP400-3

PRICE ON REQUEST

Isotropic electric and magnetic field probe for 1 Hz to 400 kHz EMF measurements, with True RMS response, FFT spectrum analysis, Weighted Peak Method mode and standards-oriented exposure assessment.

Details

View details  

New

Isotropic E-field probe - 100 kHz to 3 GHz, True RMS: WPF3

PRICE ON REQUEST

Isotropic True RMS E-field probe for RF measurements from 100 kHz to 3 GHz, with 0.2 V/m sensitivity, ISO 17025 accredited calibration and compatibility with SMP2, MonitEM and MapEM.

Details

View details  

New

Isotropic E-field probe - 100 kHz to 6 GHz, True RMS: WPF6

PRICE ON REQUEST

Isotropic True RMS E-field probe for RF exposure measurements from 100 kHz to 6 GHz, with 0.2 V/m sensitivity, ISO 17025 accredited calibration and compatibility with SMP2, MonitEM and MapEM.

Details

View details  

New

Isotropic electric field probe - 100 kHz to 8 GHz: WPF8

PRICE ON REQUEST

WPF8 is an isotropic RMS electric field probe from 100 kHz to 8 GHz, available in standard and High Power versions for RF exposure assessment.

Details

View details  

New

Isotropic electric field probe - 300 kHz to 18 GHz: WPF18

PRICE ON REQUEST

WPF18 is an isotropic True RMS electric field probe from 300 kHz to 18 GHz, available in standard and High Power versions for RF exposure assessment.

Details

View details  

New

Isotropic electric field probe - 1 MHz to 40 GHz: WPF40

PRICE ON REQUEST

WPF40 is an isotropic True RMS electric field probe for RF exposure assessment from 1 MHz to 40 GHz, with 60 dB dynamic range and ISO 17025 calibration.

Details

View details  

New

Isotropic magnetic field probe - 300 kHz to 60 MHz: WPH60

PRICE ON REQUEST

WPH60 is an isotropic RMS magnetic field probe for H-field measurements from 300 kHz to 60 MHz, with 0.018 A/m sensitivity and 60 dB dynamic range.

Details

View details  

New

Isotropic magnetic field probe - 30 MHz to 1000 MHz: WPH1000

PRICE ON REQUEST

WPH1000 is an isotropic RMS magnetic field probe for H-field RF exposure measurements from 30 MHz to 1000 MHz, with 0.018 A/m sensitivity.

Details

View details  

New

Personal EMF monitor - H-field from DC to 400 kHz: WaveMon LF-400

PRICE ON REQUEST

WaveMon LF-400 is a wearable personal EMF monitor for H-field exposure from DC to 400 kHz, with alarms, datalogger, USB setup and optional GPS.

Details

View details  

New

Personal RF monitor - 100 kHz to 60 GHz: WaveMon RF-60

PRICE ON REQUEST

WaveMon RF-60 is a wearable personal RF monitor from 100 kHz to 60 GHz with isotropic RMS sensors, overexposure alarms, datalogger and optional GPS.

Details

View details  

New

Electromagnetic field meter - broadband, selective and FFT analysis: SMP3

PRICE ON REQUEST

SMP3 is a portable electromagnetic field meter for broadband, selective and FFT-based EMF measurements from 0 Hz to 60 GHz, with WPM and real-time limit comparison.

Details

View details  

New

Isotropic electric and magnetic field probe - 1 Hz to 10 MHz: WP10M

PRICE ON REQUEST

WP10M is an isotropic True RMS electric and magnetic field probe from 1 Hz to 10 MHz, with FFT spectrum analysis and Weighted Peak Method mode.

Details

View details  

New

Isotropic electric field probe - 1 MHz to 60 GHz: WPF60

PRICE ON REQUEST

WPF60 is an isotropic True RMS electric field probe for RF exposure assessment from 1 MHz to 60 GHz, with 60 dB dynamic range and ISO 17025 calibration.

Details

View details  

New

Continuous EMF monitoring station - IoT / PoE connectivity up to 8 GHz: MonitEM-IoT

PRICE ON REQUEST

MonitEM-IoT is a compact continuous EMF monitoring station for 24/7 RF exposure assessment up to 8 GHz, with LTE-M/NB-IoT or Ethernet/PoE connectivity.

Details

View details  

New

Isotropic electric field probe - 30 MHz to 90 GHz: WPF90

PRICE ON REQUEST

WPF90 is an isotropic True RMS electric field probe for RF exposure assessment from 30 MHz to 90 GHz, compatible with SMP2, SMP3, MonitEM and MapEM.

Details

View details  

New

EMF exposure analyzer - frequency selective measurement from 30 MHz to 8 GHz: RFSelectiQ

PRICE ON REQUEST

RFSelectiQ is a frequency selective EMF exposure analyzer for RF field assessment from 30 MHz to 8 GHz, with LTE/5G NR code selective measurement options.

Details

View details  

New

Velocity transmitter - ultrasonic sensor, 4:20 mA output

PRICE ON REQUEST

Ultrasonic velocity transmitter with 4:20 mA output, RS232/USB communication, IP68 sensor, and smart power saving for open channel, sewer, wastewater, and part-filled pipe monitoring.

Details

View details  

New

Flow transmitter - 4-20 mA output: AV-FLOW TRANSMITTER

PRICE ON REQUEST

AV-FLOW TRANSMITTER for area-velocity flow measurement with ultrasonic velocity sensor, 4:20 mA output, RS232/USB communication, and software for open channel and part-filled pipe monitoring.

Details

View details  

New

Compact fixed area-velocity flowmeter - 4:20 mA output: Compact Fixed AV-Flowmeter

PRICE ON REQUEST

Compact fixed area-velocity flowmeter with ultrasonic velocity sensor, 4:20 mA output, onboard data logger, and industrial communications for wastewater, sewer, channel, and river flow monitoring.

Details

View details  

New

Fixed area-velocity flowmeter - 4:20 mA outputs: Premier Fixed AV-Flowmeter

PRICE ON REQUEST

Fixed area-velocity flowmeter with ultrasonic velocity sensor, 4:20 mA outputs, onboard data logger, and industrial communications for sewer, wastewater, channel, and river flow monitoring.

Details

View details  

New

Portable area-velocity flowmeter - data logger, battery powered: Portable AV-Flowmeter

PRICE ON REQUEST

Portable area-velocity flowmeter with ultrasonic velocity sensor, level input, onboard data logger, battery power, CSV export, and software for wastewater, river, sewer, and channel flow monitoring.

Details

View details  

New

Ultrasonic flow velocity probe - low power: RS485 MODBUS

PRICE ON REQUEST

MainProbe RS485 MODBUS ultrasonic flow velocity probe with RS485 Modbus RTU, IP68 protection, adaptive measurement, temperature compensation, and bidirectional measurement from 10 mm/s to 5 m/s.

Details

View details  

New

Ultrasonic flow velocity probe, ATEX Zone 0: RS485 MODBUS

PRICE ON REQUEST

MainProbeX RS485 MODBUS ultrasonic flow velocity probe with RS485 Modbus RTU, ATEX Zone 0 certification, IP68 protection, adaptive measurement, and bidirectional measurement from 10 mm/s to 5 m/s.

Details

View details  

New

Ozone analyzer - high sensitivity UV measurement: Model 106-L

PRICE ON REQUEST

FEM-certified ozone analyzer with UV absorption technology for precise ambient and industrial ozone monitoring from ppb to 20 ppm.

Details

View details  

New

Ozone analyzer - compact low concentration monitoring: Model 108-L

PRICE ON REQUEST

Compact ozone analyzer 0–20 ppm with UV absorption, ultra-low power consumption and FEM certification for ambient, industrial and embedded monitoring applications.

Details

View details  

New

Ozone analyzer - high concentration UV measurement: Model 106-MH

PRICE ON REQUEST

High-range industrial ozone analyzer 0–10,000 ppm using UV absorption technology with fast response, high accuracy and robust design for demanding process monitoring.

Details

View details  

New

Ozone analyzer - UV absorption high range: Model 106-M

PRICE ON REQUEST

Industrial ozone analyzer 0–1000 ppm with UV absorption technology, high precision, fast response time and multi-channel capability for demanding process monitoring.

Details

View details  

New

Ozone Analyzer – Interference-Free UV Absorption FEM: Model 211

PRICE ON REQUEST

Model 211 ozone analyzer with FEM certification delivers interference-free ambient ozone measurements using UV absorption and gas-phase scrubber technology. High precision, sub-ppb sensitivity, and robust data logging for air quality monitoring.

Details

View details  

New

High Concentration Ozone Analyzer – UV Absorption, Flow-Through: Model 106-H

PRICE ON REQUEST

It features UV absorption technology, fast response time, and a robust flow-through design for pressurized systems.

Details

View details  

New

Portable airborne particle counter - advanced data management and system integration: ZR-1630

PRICE ON REQUEST

Discover the ZR-1630 portable airborne particle counter for cleanroom monitoring, with 1 CFM flow rate, advanced data storage, RS485 connectivity, and multi-channel particle measurement from 0.3 to 10.0 µm.

Details

View details  

New

Portable particle counter - 0.3 µm sensitivity: ZR-1620

PRICE ON REQUEST

Portable particle counter ZR-1620 with 0.3 µm sensitivity, ideal for cleanroom validation, environmental monitoring, and ISO compliance applications.

Details

View details  

New

Aerosol Photometer for HEPA Filter Leak Testing – ZR-6012

PRICE ON REQUEST

ZR-6012 aerosol photometer for HEPA and ULPA filter leak detection. Portable cleanroom testing instrument for pharmaceutical, laboratory and HVAC validation.

Details

View details  

New

Portable Low Volume Air Sampler Pump – ZR-3620

PRICE ON REQUEST

ZR-3620 low volume air sampler for environmental monitoring and gas sampling. Portable pump with precision flow control for industrial hygiene and laboratory air sampling.

Details

View details  

New

Laskin Nozzle Aerosol Generator for HEPA Filter Testing – ZR-1300A

PRICE ON REQUEST

ZR-1300A aerosol generator with Laskin nozzle technology for HEPA and ULPA filter leak testing. Ideal for cleanroom validation and pharmaceutical environments.

Details

View details